Mix And Cement | ITM Co., Ltd.


Home > Fibrexcel/Fibermax > Other Products > Mix And Cement

\|	FIBREXCEL BOARD	\|	FIBREXCEL BLANKET	\|	BULK FIBER	\|	JOINTSEALER

\|	MIX AND CEMENT	\|	ROPE AND BRAID	\|	VARIFORM	\|

Fiberplast consists of Bulk Fibers, refractory powders and binders. It is a versatile insulation product used for cast shapes, furnace linings and general repairs of refractory linings.
Fiberplast-GS is used for side wall of regenerator for glass melting furnace. CoatingCement contains milled fibers and binders to provide an air setting refractor or bond. It is available in a range of consistencies for brush, spray and trowel application. It is widely used as a fiber-to-fiber adhesive. MB Cement and 17D Cement are high temperature cements for Fibermax product forms. Moldable and Moldable-T consists of Fibrexcel ceramic fibers dispersed in a sticky water based refractory binder. These products have a putty-like consistency which permits application by caulking, troweling or hand forming. Moldable-T produces smaller amount of gas than Moldable, making it suitable for trough and distributor linings of nonferrous metals. Rigidizer is an inorganic liquid binder as a surface treating agent to increase the hardness of Fibrexcel products.

Fiberplast		GS	13	15	15K
Color		White	White	White	White
Max. Service Temperature(ºC)		1300	1300	1500	1500
Bulk Density(Kg/m³)	Before Dry	1150	1150	1200	1650
Bulk Density(Kg/m³)	After Heating at 110ºC	500	500	500	700
Loss on Ignition (%)		2.0	2.0	1.5	1.5

	Coating Cement		MB Cement	17D Cement
	150	180	MB Cement	17D Cement
Color	White	White	White	White
Max. Service Temperature(ºC)	1200	1200	1400	1700
Bulk Density(Kg/m³)	1700	1650	1100	1050
Solid Content (%)	72	70	35	28

		Moldable
			T	16D
Color		White
Max. Service Temperature(ºC)		1200	1200	1600
Bulk Density (Kg/m³)	Before Dry	1300	1400	1200
Bulk Density (Kg/m³)	After Heating at 110ºC	650	650	500
Loss on Ignition (%)		7	4	9